Deep interpretation of high and low temperature experimental box installation 7 major considerations

Proper use of high and low temperature test chambers, and good habits can effectively extend the life of equipment. Next, Xiaobian will come to talk to you about how to use the high and low temperature experiment box efficiently and what are its precautions. Let's take a look.

1. The high and low temperature test chamber should be placed in a well ventilated place. The back of the experiment box should be more than 60 cm away from the wall, and no excessive debris should be placed around it.

2. The high and low temperature test chamber should be placed in a place with low humidity.

3. High and low temperature test chambers should be placed away from heat sources such as radiators, and direct sunlight should be avoided. This is beneficial to the heat dissipation of the high and low temperature test chamber.

4. Heavy objects or excessive debris should not be placed on the high and low temperature test chambers, especially other electrical appliances.

5. The high and low temperature experiment box should be placed in a stable place on the ground. Otherwise, when the compressor starts, it will generate vibration and emit a lot of noise. In the long run, the service life of the high and low temperature test chamber will be shortened.

6. When working in high and low temperature test chambers, the number of door opening should be reduced as much as possible to reduce the overflow of hot air/cool air.

7. The power supply voltage fluctuates greatly. If the power is turned off repeatedly, the use of the high and low temperature test chamber should be suspended, and the power supply should be cut off to prevent the compressor from being burned out. Do not power on the compressor immediately after the high and low temperature test chamber is stopped. It should be stopped after 2-5 minutes.

Friendly reminder

a. When handling, please pay attention to the body tilt can not exceed 15 °;

b. Keep the vertical state of the box when transporting. Do not invert and lie horizontally. Never grab the door handle or pull the condenser to avoid damage.

Deep interpretation of high and low temperature experimental box installation 7 major considerations

Wooden Bookcase

A bookcase, or bookshelf, is a piece of furniture with horizontal shelves, often in a cabinet, used to store books or other printed materials. Bookcases are used in private homes, public and university libraries, offices and bookstores. Bookcases range from small, low models the height of a table to high models reaching up to ceiling height. Shelves may be fixed or adjustable to different positions in the case. In rooms entirely devoted to the storage of books, such as libraries, they may be permanently fixed to the walls and/or floor.

Wooden Bookcase 3 Jpg

A bookcase may be fitted with glass doors that can be closed to protect the books from dust or moisture. Bookcase doors are almost always glazed with glass, so as to allow the spines of the books to be read. Especially valuable rare books may be kept in locked cases with wooden or glazed doors. A small bookshelf may also stand on some other piece of furniture such as a desk or chest. Larger books are more likely to be kept in horizontal piles and very large books flat on wide shelves or on coffee tables.

Storage Bookcase,Solid Wood Bookcase,Rustic Bookcase,Wood Bookcase,Wooden Storage Bookcase,Wood Storage Bookcase

Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigercn.com

Posted on