As one of the most commonly used items in office equipment, copy paper plays an indispensable role in our daily office life. Do you really know the correct choice and use of copy paper?
Copy paper is one of the most consumed materials in electrostatic copiers and is the embodiment of copy quality. Therefore, be sure to pay attention to the correct use of copy paper. Here are some of the elements and methods to properly select and use copy paper, and I hope to help you:
Thickness: The thickness of paper used in electrostatic copiers is generally between 64-80 grams per square meter, and other copiers can use between 50-200 grams per square meter of copy paper.
Surface luminosity: General electrophotographic paper, the surface luminosity is slightly higher, if it is too smooth, it is unfavorable for fixing, and it is not easy to cure. Single-adhesive paper can be used as required (single-sided copying). If there is a copying machine with double-sided copying, it is better to use double-adhesive paper. The surface of the copy paper is preferably white.
Density of paper: The fibers of the paper are fine. Because of the fiber thickness of the paper, one affects the quality of copying (ie, the paper separation rate), and the other is that it is easy to produce paper, paper, and dirty machines. In particular, the optical part is dirty and causes the bottom ash of the copy. Paper is too brittle to break and cause paper jams, as well as long-term storage of copies and copies.
The hardness of the paper: some papers, although suitable in grams, are not necessarily suitable for use in copiers. The reason is that weight and stiffness are two different things, but often due to poor stiffness, wrinkles when slightly encountered during transport. Blocked. If there are two kinds of papers, each is 70g per square meter, but the fiber structure of the paper is soft and the stiffness is poor. When there is a slight resistance, the wrinkles are often jammed. Therefore, only relatively hard (hard) paper can be applied to the electrostatic copying machine.
Moisture of paper: Damp paper (paper with too much water content), which will affect copy quality due to reduced insulation properties. Therefore, copy paper must be protected from moisture, preferably in a well ventilated and drier place. Finished copy paper purchased from the store (500 sheets per pack), and then remove one pack after use. If the paper is made, the bundle should not be opened before the cut, and the cut paper should be kept in a stack.
Paper cutting: The fibers of the paper are divided into vertical and horizontal. If the flat plate is cut in the direction of the fiber, the long side is "longitudinal" in parallel with the fibers of the paper, and the "longitudinal" is "horizontal" in parallel with the fibers. Electrostatic copying requires that the fiber direction of the paper be "longitudinal", because the stiffness is good, the paper has low resistance during running (the running direction of the paper is consistent with the fiber direction of the paper), and it is not easy to tear.
After reading the selection and use of common knowledge of the copy paper that Xiaobian has arranged for you, have you found some small problems in your usual time? Or did you learn a little common sense? This is the value of our little article!
Wall Flip Clock is our main clock. It's Flip Clock and Wall Clock. Our wall flip clock can hang on the wall and put on the desk.
Unique design with patent. Combination of modern and classic.
Retro wall flip clock, Hour and Minutes will change by itself. 48 pcs hour flip card, 60 pcs minutes flip card. Hour Flip card changes every hour and minute card change every minute. It is very easy for you to read the time.
Wall Flip Clock,Retro Flip Wall Clock,Flip Wall Clock,Wall Flip Clock Black
Guangzhou Huan Yu Clocking Technologies Co., Ltd. , https://www.mk-times.com