**How to Use the Smart Artificial Climate Box Correctly**
[Image: How to use smart artificial climate box correctly](http://i.bosscdn.com/blog/20/14/08/223222152173.jpg)
Shanghai Xinzhuang Instrument Co., Ltd. is a leading manufacturer that combines R&D, production, and sales, with a strong focus on technological innovation. The company continuously contributes to the advancement of scientific research by developing high-quality laboratory equipment. With excellent product quality and professional service, Shanghai Xinzhuang welcomes all inquiries at [http://](http://).
---
### **Step-by-Step Guide to Using the Smart Artificial Climate Box**
#### 1. **Connecting the Humidifier**
- Plug the humidifier power cord into the socket located on the right side of the climate box.
- Attach the humidifying hose to the spray head of the humidifier.
- Insert the other end of the hose into the humidifier’s inlet and add water according to the manufacturer’s instructions.
#### 2. **Understanding the Control Buttons**
- **Power Button (A-1):** Turn the switch to “I†to power on the device. The control panel will display numbers once the system is running.
- **Lighting Button (A-2):** This button controls the internal lighting. Press it to turn the lights on or off. In the running state, pressing and holding for about 3 seconds allows you to access system settings:
- "Addr" (communication address)
- "tc" (temperature correction)
- "hc" (humidity correction)
- "sbL" (humidity proportional limit)
- You can adjust these values using the ▲▼ buttons.
- **Set Query Button (A-3):** Press this to enter the setting mode. The time, temperature, and humidity windows will flash, allowing you to configure day and night parameters.
- **Day/Night Button (A-4):** Switch between day and night modes during operation.
- **Humidity/Illumination Button (A-5):** Toggle between humidity and illuminance settings. During the night, this function is disabled.
- **▲▼ Buttons (A-6):** These are used for increasing or decreasing values in both setting and running modes. Holding them for 2 seconds will allow continuous adjustment.
#### 3. **Display Window Functions**
- **Period Window (B-1):** Shows the current cycle number. It displays digits, decimals, and flashes when the number exceeds certain thresholds.
- **Time Window (B-2):** Displays the remaining time in hours and minutes, counting down from the set duration.
- **Temperature Window (B-3):** Shows the set and actual temperature in degrees Celsius.
- **Humidity/Illumination Window (B-4):** Displays humidity in %RH and illuminance as a percentage. For example:
- 20% = 1 light on
- 40% = 2 lights on
- 60% = 3 lights on
- 80% = 4 lights on
- Hi% = All lights fully on
#### 4. **Example Operation**
Suppose you want to set:
- Daytime: 12 hours, 20°C, 75% RH, 60% illumination
- Nighttime: 12 hours, 10°C, 65% RH
Follow these steps:
1. Power on and press the Lighting button to access system settings.
2. Adjust temperature and humidity corrections using the ▲▼ keys.
3. Press Set Query to enter day settings, then adjust time, temperature, humidity, and illumination accordingly.
4. Press Set Query again to switch to night settings and repeat the process.
5. Once done, return to the running state, and the climate box will operate in cycles.
---
### **Important Safety Tips**
1. Avoid tilting or laying the unit more than 45 degrees to prevent damage.
2. Do not frequently change the temperature setting to avoid overloading the compressor.
3. If the temperature indicator shows “Err,†it means there is a thermal resistance fault; the system will stop heating or cooling automatically.
4. When the set temperature is below 10°C, the incubator will automatically stop heating to prevent ice formation.
5. Do not overcrowd the chamber; leave space for proper air circulation.
6. Avoid touching or damaging the internal temperature sensor, as it may cause control issues.
7. Clean the exterior with a dry cloth only. Avoid using acidic or alkaline cleaners.
8. Keep the inside of the box dry when not in use, and always turn off the power and set all switches to “0.â€
9. Only trained personnel should handle maintenance. Never attempt repairs if you are not qualified.
10. Always read the user manual carefully before operating the device.
Shanghai Xinzhuang Instrument Co., Ltd. is committed to providing reliable and innovative lab solutions. For more information or assistance, feel free to contact us at [http://](http://).
Vegetable Mill,Food Mill,Potato Cutter,Potato Fry Cutter
Xiongyang Household Co., Ltd , https://www.yjkitchen-manage.com