Nondestructive Testing Standard Catalogue for Nondestructive Testing

Non-Destructive Testing Standard Catalog

First, General and Comprehensive Standards

GB/T 5616-2003: Conventional Guidelines for Nondestructive Testing

GB/T 6417.1-2005: Classification and Description of Defects in Metal Fusion Joints

GB/T 9445-2008: Qualification and Certification of Non-Destructive Testing Personnel

GB/T 12469-1990: Requirements for Quality Assurance in Steel Fusion Welding and Defect Classification

GB/T 14693-2008: Symbols for Non-Destructive Testing of Welds

JB/T 4730-2005: Non-Destructive Testing of Special Equipment

JB/T 5000.14-1998: Technical Conditions for Heavy Machinery - Non-Destructive Testing of Steel Castings

JB/T 5000.15-1998: Technical Conditions for Heavy Machinery - Non-Destructive Testing of Forged Steel Parts

JB/T 7406.2-1994: Terminology for Non-Destructive Testing Equipment

JB/T 9095-1999: Technical Specification for Conventional Non-Destructive Testing of Centrifuge and Separator Forgings

JB/T 10059-1999: Method for Preparing Models of Test Machines and Non-Destructive Testing Instruments

Second, Surface Inspection Methods

GB/T 5097-2005: Indirect Evaluation Method of Black Light Source

GB/T 9443-1988: Penetrant Testing and Defect Display Marking Method for Steel Castings

GB/T 9444-1988: Magnetic Particle Testing and Quality Rating Method for Steel

GB/T 10121-1988: Magnetic Particle Inspection Method for Steel Tower Hairline Cracks

GB/T 12604.3-2008: Terminology for Penetration Testing in Non-Destructive Testing

GB/T 12604.5-2008: Terminology for Magnetic Particle Testing in Non-Destructive Testing

GB/T 15147-1994: Permeation Test Method for Nuclear Fuel Component Parts

GB/T 15822-2005: Magnetic Particle Inspection Method

GB/T 16673-1996: Measurement of UV-A Radiation from Black Light Sources for Non-Destructive Testing

GB/T 17455-2008: Metallographic Replica Technology for Surface Inspection in Non-Destructive Testing

JB/T 1582-1996: Ultrasonic Flaw Detection Method for Steam Turbine Impeller Forgings

GB/T 18851-2005: Standard Test Block for Penetration Testing in Non-Destructive Testing

Judging the quality of components is essential for ensuring safety and reliability. These standards provide detailed procedures and classifications to ensure that defects are accurately identified and properly assessed.

Third, Radiographic Methods

GB/T 3323-2005: Radiographic Examination of Metal Fusion Welded Joints

GB 4792-1984: Basic Standards for Radiation Health Protection

GB/T 4835-1984: Portable X and Î³ Radiation Dose Rate Meter and Monitor for Radiation Protection

GB 5294-1985: Method for Monitoring Personal Dose of Radiation Workers

GB/T 5677-1985: Radiographic and Film Grade Classification Method for Steel Castings

GB/T 9582-1998: Determination of ISO Sensitivity and Average Slope of Industrial Radiographic Films (X and Gamma Ray Exposure)

GB 10252-1988: Radiation Protection and Safety Standards for Cobalt-60 Irradiation Equipment

GB 5294-2001: Occupational Exposure Monitoring Standard for External Exposure

GB18465-2001: Radiological Protection Requirements for Industrial Radiography

GB/T 11346-1989: X-ray Photography Inspection of Aluminum Alloy Castings with Pinholes (Circular) Classification

GB/T 11806-1989: Regulations for the Safe Transport of Radioactive Materials

GB/T 11851-1996: X-ray Inspection Method for Welded Joints of Pressurized Water Reactor Fuel Rods

GB/T 12604.2-1990: Terminology for Non-Destructive Testing

GB/T 12604.8-1995: Terminology for Neutron Detection in Non-Destructive Testing

GB/T 12605-1990: X-ray Transillumination Process and Quality Classification for Steel Pipe Ring Seam Fusion Welding

GB/T 13161-2003: Direct Reading Personal X and Î³ Radiation Dose Equivalent and Dose Equivalent Rate Monitor

GB/T 13653-1992: X-ray Inspection Method for Aerial Tires

GB/T 14054-1993: Fixed X and Î³ Radiation Dose Rate Meter, Alarm Device, and Monitor for Radiation Protection

GB/T 14058-1993: Î³-Ray Flaw Detector

GB 16357-1996: Radiological Protection Standard for Industrial X-ray Flaw Detection

GB 16363-1996: Shielding Performance and Test Methods for X-ray Protective Materials

GB/T 16544-1996: Î³-Ray Panoramic Exposure Photography Method for Spherical Storage Tanks

GB 16757-1997: X-ray Protective Clothing

GB/T 17150-1997: Specification for Radiological Health Monitoring - Part 1: Industrial X-ray Testing

GB/T 17589-1998: Image Quality Assurance Test Specification for X-ray Computed Tomography Apparatus

GB 17925-1999: Real-Time Imaging Inspection of Butt Welds in Gas Cylinders Using X-rays

GB 18465-2001: Radiological Protection Requirements for Industrial Gamma Ray Detection

JB/T 5075-2004: Lead Intensifying Screen for Radiography

JB/T 5453-1991: Technical Conditions for Industrial X-ray Image Intensifier TV System

JB/T 6220-2004: Blackness Meter for Radiographic Inspection

JB/T 6221-1992: General Technical Conditions for Industrial X-ray Flaw Detectors

JB/T 6440-1992: Radiographic Inspection of Valve Pressed Steel Parts

JB/T 7260-1994: Radiography and Quality Classification of Copper Welds in Air Separation Equipment

JB/T 7412-1994: Fixed (Mobile) Industrial X-ray Flaw Detector

JB/T 7413-1994: Portable Industrial Xenon Detector

JB 7788-1995: Protective Rules for Industrial X-ray Flaw Detectors Below 500kV

JB/T 7902-1999: Linear Image Quality Meter

JB/T 7903-1999: Industrial Radiographic Film Viewing Lamp

JB/T 8543.1-1997: Radiographic Testing Methods for Pressure-Cast Steel Parts and Negative Grade Classification of Pump Parts

JB/T 8764-1998: General Technical Conditions for X-ray Tubes for Industrial Flaw Detection

GB/T 4075-2003: General Requirements and Release of Sealed Radioactive Sources

JB/T 9215-1999: Method for Controlling the Quality of Radiographic Images

JB/T 9217-1999: Radiographic Inspection Method

JB/T 9402-1999: Performance Test Method for Industrial X-ray Flaw Detectors

Fourth, Acoustic Methods

GB/T 1786-1990: Ultrasonic Inspection Method for Forged Round Cake

GB/T 2970-2004: Ultrasonic Inspection Method for Medium-Thick Steel Plates

GB/T 3310-1999: Ultrasonic Flaw Detection Method for Copper Alloy Bars

GB/T 4162-1991: Ultrasonic Inspection Method for Forged Steel Bars

GB/T 5193-1985: Ultrasonic Flaw Detection Method for Titanium and Titanium Alloy Processed Products

GB/T 5777-1996: Ultrasonic Flaw Detection Method for Seamless Steel Tubes

GB/T 6402-1991: Ultrasonic Inspection Method for Steel Forgings

GB/T 6519-2000: Ultrasonic Inspection Method for Deformed Aluminum Alloy Products

GB/T 7233-1987: Ultrasonic Flaw Detection and Quality Rating Method for Steel Castings

GB/T 7734-2004: Ultrasonic Inspection Method for Composite Steel Plates

GB/T 7736-2001: Ultrasonic Inspection of Steel with Low Magnification and Defects

GB/T 8361-2001: Ultrasonic Flaw Detection Method for Cold Drawn Round Steel Surface

GB/T 8651-2002: Metal Sheet Ultrasonic Wave Detection Method

GB/T 8652-1988: Ultrasonic Inspection Method for Deformed High Strength Steel

GB/T 11259-2008: Method for Making and Verifying Steel Comparison Test Blocks for Ultrasonic Inspection

GB 11343-2008: Contact Ultrasonic Oblique Flaw Detection Method

GB 11344-2008: Contact Ultrasonic Pulse Echo Method for Thickness Measurement

GB 11345-1989: Manual Ultrasonic Flaw Detection Method for Steel Welds and Classification of Flaw Detection Results

GB/T 12604.1-2005: Terminology for Ultrasonic Testing in Non-Destructive Testing

GB/T 12604.4-2005: Terminology for Acoustic Emission Detection in Non-Destructive Testing

GB/T 12969.1-1991: Ultrasonic Inspection Method for Titanium and Titanium Alloy Pipes

GB/T 13315-1991: Ultrasonic Flaw Detection Method for Cold Rolled Work Rolls of Forged Steel

GB/T 13316-1991: Ultrasonic Flaw Detection Method for Cast Steel Rolls

GB/T 15830-2008: Classification of Ultrasonic Flaw Detection Methods and Test Results of Butt Welds in Steel Pipelines

GB/T 18182-2000: Acoustic Emission Detection and Evaluation Method for Metal Pressure Vessels

GB/T 18256-2000: Ultrasonic Testing Method for Confirming Water Tightness of Welded Steel Pipes (Except Submerged Arc Welding)

GB/T 18329.1-2001: Ultrasonic Non-Destructive Testing of the Combined Strength of Multi-Layer Metal Sliding Bearings for Plain Bearings

GB/T 15830-1995: Classification of Ultrasonic Flaw Detection Methods and Test Results of Butt Welds in Steel Pipelines

GB/T 18694-2002: Characterization of Ultrasonic Testing Probes and Their Sound Fields

GB/T 18852-2002: Reference Test Blocks and Methods for Measuring the Characteristics of Contact Probes in Ultrasonic Testing

JB/T 1581-1996: Ultrasonic Flaw Detection Method for Steam Turbine, Turbo Generator Rotor, and Spindle Forging

JB/T 1582-1996: Ultrasonic Flaw Detection Method for Steam Turbine Impeller Forgings

JB/T 3144-1982: Ultrasonic Flaw Detection Method for Fillet Welds of Large Diameter Pipe Sockets

JB/T 4008-1999: Liquid Immersion Ultrasonic Longitudinal Wave Direct Flaw Detection Method

JB/T 4009-1999: Contact Ultrasonic Longitudinal Wave Direct Flaw Detection Method

JB/T 4010-1985: Ultrasonic Flaw Detection Method for Steel Retaining Rings of Steam Turbine Generators

JB/T 5093-1991: Technical Conditions for Ultrasonic Testing of Friction-Welded Valves for Internal Combustion Engines

JB/T 5439-1991: Ultrasonic Flaw Detection of Compressor Ductile Iron Parts

JB/T 5440-1991: Ultrasonic Flaw Detection of Compressor Forged Steel Parts

JB/T 5441-1991: Ultrasonic Flaw Detection of Compressor Cast Steel Parts

JB/T 5754-1991: Single Channel Acoustic Emission Detector Technical Conditions

JB/T 6903-1993: Ultrasonic Inspection Method for Valve Forging Steel Parts

JB/T 6916-1993: In-Service High-Pressure Gas Cylinder Acoustic Emission Detection and Assessment Method

JB/T 7367.1-2000: Ultrasonic Flaw Detection Method for Cylindrical Spiral Compression Springs

JB/T 7522-2004: Method for Measuring Ultrasonic Speed of Materials

JB/T 7524-1994: Ultrasonic Flaw Detection of Welded Steel Structure Welds

JB/T 7602-1994: Ultrasonic Flaw Detection of T-Joints for Horizontal Internal Combustion Boilers

JB/T 7667-1995: In-Service Pressure Vessel Acoustic Emission Testing and Evaluation Method

JB/T 8283-1995: Performance Test Method for Acoustic Emission Testing Instruments

JB/T 8428-1996: Standard Test Block for Calibrating Steel Weld Ultrasonic Testing Equipment

JB/T 9214-1999: A-Type Pulse Reflection Ultrasonic Flaw Detection System Working Performance Test Method

JB/T 10061-1999: General Technical Conditions for Type A Pulse Reflection Ultrasonic Flaw Detectors

JB/T 10062-1999: Probe Performance Test Method for Ultrasonic Flaw Detection

JB/T 10326-2002: Technical Standard for Ultrasonic Inspection of Generator Guard Ring

JB/T 10559-2006: Non-Destructive Testing of Lifting Machinery for Steel Welds