The biochemical incubator display shows the actual temperature

Shanghai Xinzhuang Instrument Co., Ltd. is a leading manufacturer of high-quality biochemical incubators under the LNB brand. Their products are known for being energy-efficient, environmentally friendly, and technologically advanced, making them a top choice in the domestic market. With professional manufacturing processes, they ensure both safety and affordability for users.

**Operating Instructions:** 1. Place the incubator on a flat and stable surface. Adjust the two support screws at the bottom of the unit to ensure stability. 2. Connect the power cord to a properly grounded outlet. Turn on the power switch, and the display should light up. At this point, the screen will show the current temperature and operating time inside the incubator. 3. **Time Setting:** - Press the "SET" button to enter the time-setting mode. - When the decimal point in the "minute" section lights up, you can adjust the minutes (up to 59 minutes) using the "▲" or "▼" buttons. - Press "SET" again to move to the hour setting. Once the decimal point in the "hour" section lights up, set the desired hours (up to 99 hours). - After both settings are complete, press "ENTER" to confirm the time and proceed. 4. **Temperature Setting:** - Press "SET" again. When the decimal point in the last digit of the temperature display lights up, you can adjust the temperature using the "▲" or "▼" buttons. - The temperature range is from 5°C to 50°C. - After confirming the temperature, avoid frequent adjustments to prevent the compressor from overworking, which could reduce its lifespan. 5. To check the set time and temperature, press "SET" to view the values, then press "ENTER" to return to the normal working state. 6. If lighting is needed inside the incubator, use the "lighting switch." Otherwise, keep it turned off to avoid affecting the internal temperature.

**Precautions and Maintenance:** 1. Condensation may occur when the temperature is low. Make sure to drain any water from the tray at the bottom regularly. 2. Keep the exterior clean using a dry cloth. Avoid using acidic or alkaline cleaners, as they may damage the surface. 3. Ensure that the power supply has a reliable ground connection. Always unplug the device when not in use to prevent electrical hazards.

Shanghai Xinzhuang follows a philosophy centered on quality, technology, efficiency, and service. Every product, every project, and every process reflects their commitment to excellence. We welcome you to explore our range and experience the difference!

For more information, visit: http://