Recently, the "Electronic Compression Tester" standard (Q / 0105DRK002-2013), "Electronic Compression Tester" standard (Q / 0105DRK001-2013), "Electronic Tensile Tester" standard (Q / 0105DRK003-2013) three The evaluation of the enterprise standard economy by the expert group of the Nanshi Municipal Quality Supervision Bureau and the registration and filing of the Standards Office were approved by the Tianqiao Branch of the Jinan Municipal Quality Supervision Bureau for external publication and were officially implemented on the same day. This is the first complete technical standard for quality inspection equipment in the light industry in China's rubber, plastics and packaging industry. It is also the first set of relatively complete and practically instructive standards for quality inspection equipment in the light industry.
Since the mid-1990s, the country has paid more and more attention to the product quality of the light industry, and the technology of quality inspection equipment to detect product quality has advanced by leaps and bounds, achieving tremendous innovation. In particular, testing equipment technology and mechanical processing with Chinese characteristics have leapt to a higher level in the world. With the increasing maturity of testing equipment manufacturing technology and the increasingly intensified market competition, its standardization and standardization work is imperative.
In view of the fact that there are no corresponding national standards and industry standards in the quality inspection equipment of the domestic rubber, plastics and packaging light industry, Jinan Drake Instrument Co., Ltd. (Drake) is responsible for promoting the healthy development of China ’s industry. With strong technical strength and talent advantages, based on the "Republic of China Standardization Law", "General Electronic Universal Testing Machine National Standards" and other relevant laws and regulations, the first organization of technical personnel for rubber, plastics, packaging and other light industry quality inspection equipment Theories and practices are comprehensively analyzed and summarized. After four stages of planning, data collection, inductive compilation, and review, the standards for "Electronic Compression Testing Machine" (Q / 0105DRK002-2013) and "Electronic "Compression tester" standard (Q / 0105DRK001-2013), "electronic tensile testing machine" standard (Q / 0105DRK003-2013) these three enterprise standards.
The main contents of the three corporate standards of Derrick are used for polyethylene (PE), polypropylene (PP), polyoxymethylene (POM), polystyrene (PS), ABS plastic, polycarbonate (PC), nylon, Engineering plastics, polyamides, acrylates, cellulose esters and other rubber and plastic products quality testing equipment, its own technology, test methods, inspection rules and signs, labels, instructions, packaging, storage, transportation and other requirements.
In this review, the Standards Review Committee was six experts randomly selected from the Jinan City Standards Evaluation Experts Database in accordance with national regulations. They are Xu Yi Engineer, Information Center of Jinan City Quality and Technical Supervision Bureau, and Shandong Tianyin CNC Machinery Co., Ltd. Chief Engineer, Section Chief Tian Dutian, Metrology Division, Jinan Municipal Quality and Technical Supervision Bureau, Tong Yong Engineer, Shandong Academy of Metrology, Wu Chunyan, Senior Engineer, Jinan No. 2 Machine Tool Group Corporation, Lou Xiaohong, Senior Engineer, Jinan Product Quality Supervision and Inspection Institute. Also attending the meeting were Jinan Drake Ma Futing engineer, Zhang Gaoqiang Senior Engineer, and other members of the standards writing group. The Standards Review Committee heard three standards from the standard preparation unit Derrick, the electronic compression tester standard (Q / 0105DRK001-2013), the electronic compression tester standard (Q / 0105DRK002-2013), and the electronic tensile tester standard (Q / 0105DRK003-2013) Introduction of the formulation work. The representative of the Standards Preparation Group reported on the contents, standards and investigations and analysis of the standards.
The review committee believes that the standard preparation group has done a lot of work, and the standard preparation fully considers meeting the needs of technological development and production, and reflects the progress and development trend of the industry. The setting of standard test items takes into account product characteristics, applications, and durability requirements. The test method adopts the method stipulated in the current national and industry standards, and at the same time, it is appropriately adjusted according to the particularity of the product to make the test results comparable. The standard preparation team collected a lot of domestic and foreign data and actual conditions, and verified that the tests were sufficient and the test data were reliable. Finally, the review committee unanimously passed the review of the standard, and believed that the standard had reached the domestic advanced level.
The introduction of enterprise product standards provides an important guarantee for enterprises to ensure product quality and maintain their leading position in the industry. Enterprise standards are usually more stringent than industry standards and national standards. The domestic standards for quality inspection equipment for light industry in rubber, plastics and packaging that Drake first drafted have made important contributions to China's light plastics industry in rubber, packaging and other industries. Laid a solid foundation.
Weihai Tong Park Arts & Crafts Co.,Ltd , https://www.whtongpark.com