Anaerobic incubator
Shanghai Xinzhuang Instrument Co., Ltd. develops the brand anaerobic incubator of Xinzhuang (LNB) brand, which is energy-saving and environmentally friendly and domestically leading. Professional manufacturing is more secure and affordable.
The operation inside the incubator and the movement of the items into and out of the incubator: the moving in and out of the sample and equipment, and the movement of the operator's hand into and out of the incubator are done through the porthole. The pallet can hold 10 90mm plates, and each porthole has a pallet.
Enter the operating procedure: a. The sleeve should be placed over the flange of the porthole and secured by an “O†ring; b. Place the sample or equipment on the shelf of the outer door and lock the outer door; c. Remove the watch, ring, bracelet Or other jewelry that may break the sleeve; d. Put the sleeve on the forearm (you can use talcum powder); e. Use the foot switch to vacuum the sleeve and then use “Gas†to inflate, at least once. f. Loosen the inner door lock; g. fully open the inner door until the inner door is sucked by the magnet on the inner wall of the incubator; h. The operator can now operate inside the incubator. Exit the operating procedure: Place the sample/equipment to be taken out on the shelf and close the inner door. Cultivation: The inside of the incubator is separated into two layers by a shelf. It is recommended that: a. Place the plate on the pallet; b. Do not stack more than 10 plates; c. If a pre-tilt plate is used, it is guaranteed to be prepared; d. If the plate needs to be cultured for more than 72 hours, it is recommended to use a top open bag or a suitable container to prevent air drying; e. Do not stack more than six plates on the front edge of the shelf.
Note: The operation in the incubator should be as gentle as possible, especially when entering and exiting. If the action is large, the air pressure in the tank will change and the gas will be wasted.
Shanghai Xinzhuang Experimental Instrument Co., Ltd. specializes in the production of constant temperature shaker, low temperature water tank, water bath constant temperature oscillator, gas bath constant temperature oscillator, shaker, incubator and other related instruments. The factory has strong technical strength and various technical indicators are leading domestically. The selection of materials is exquisite, the craftsmanship is exquisite, the quality is good, the price is reasonable. Since the establishment of the company, it has paid great attention to product development, upgrade and update, and constantly introduces intelligent instruments with good operability and stability, which is the principle that Xinzhuang Instruments has always followed. .
Enter the operating procedure: a. The sleeve should be placed over the flange of the porthole and secured by an “O†ring; b. Place the sample or equipment on the shelf of the outer door and lock the outer door; c. Remove the watch, ring, bracelet Or other jewelry that may break the sleeve; d. Put the sleeve on the forearm (you can use talcum powder); e. Use the foot switch to vacuum the sleeve and then use “Gas†to inflate, at least once. f. Loosen the inner door lock; g. fully open the inner door until the inner door is sucked by the magnet on the inner wall of the incubator; h. The operator can now operate inside the incubator. Exit the operating procedure: Place the sample/equipment to be taken out on the shelf and close the inner door. Cultivation: The inside of the incubator is separated into two layers by a shelf. It is recommended that: a. Place the plate on the pallet; b. Do not stack more than 10 plates; c. If a pre-tilt plate is used, it is guaranteed to be prepared; d. If the plate needs to be cultured for more than 72 hours, it is recommended to use a top open bag or a suitable container to prevent air drying; e. Do not stack more than six plates on the front edge of the shelf.
Note: The operation in the incubator should be as gentle as possible, especially when entering and exiting. If the action is large, the air pressure in the tank will change and the gas will be wasted.
Shanghai Xinzhuang Experimental Instrument Co., Ltd. specializes in the production of constant temperature shaker, low temperature water tank, water bath constant temperature oscillator, gas bath constant temperature oscillator, shaker, incubator and other related instruments. The factory has strong technical strength and various technical indicators are leading domestically. The selection of materials is exquisite, the craftsmanship is exquisite, the quality is good, the price is reasonable. Since the establishment of the company, it has paid great attention to product development, upgrade and update, and constantly introduces intelligent instruments with good operability and stability, which is the principle that Xinzhuang Instruments has always followed. . Welcome to inquire.
Useful Golf Bag,Standard Package,Nylon Golf Stand Bag,Golf Tour Bags
Grand Dragon Sports Company Limited , https://www.golfyy.com